Test wody #594467

Test RO water: 594467

Aquarium (SPS): Test af hanevand + kørende balje.

Date: 2024-03-14

Remarks: Rent hanevand. Koldt vand

Element	Recommended result	Result	Difference
Salinity Salinity	33 - 38 ppt	35 ppt	- 0.5 ppt
Recommended result: 35.5 ppt Result: 35 ppt Salinity Salinity is one of the most important parameters. Avoid sudden salinity changes as they're harmful to the aquatic life. Make sure, that you use freshly calibrated refractometer dedicated for seawater (not for the food industry!). Keep in mind, that the higher salinity is, the higher are the levels of micro & macro elements in the water. When salinity drops, all levels of the water elements will drop too.
KH KH	6.5 - 8.5 dKH	7.6 dKH	+ 0.1 dKH
Recommended result: 7.5 dKH Result: 7.6 dKH KH The correct KH level in a saltwater aquarium allows corals to build skeletons and provides healthy growth. The right amount of carbonate ions allows keeping pH at a stable level. Stability is extremely important for this parameter, so if your corals start whitening from the bottom, you should consider controlling your KH levels more frequently.
PO4 Phosphate	0 - 0.0300 mg/l	0.6865 mg/l	+ 0.6865 mg/l
Recommended result: 0 mg/l Result: 0.6865 mg/l Recommendations Warning! Level of PO4 is too high, if you want to lower it, do a water change and use Phosphate Minus and NitraPhos Minus. You can also use Pro Bio S and -NP Pro. Phosphate Phosphate in the aquarium water appear as a side effect of feeding the fish. They're a media for the development of undesirable algae. During intensive feeding, you should remember not only about the use of phosphate lowering agents or about regular water changes.
Al Aluminum	0 - 0.0100 mg/l	0.0115 mg/l	+ 0.0115 mg/l
Recommended result: 0 mg/l Result: 0.0115 mg/l Recommendations Warning! Level of aluminium is too high, if you want to lower it, do a water change. It's worth to check your RO water for contaminants. Aluminum The concentration of aluminum in the natural seawater is about 10 µg/l. In case of increased level of this element in the tank, change the water in order to emove it excess.
As Arsenic	0 - 0.0030 mg/l	0 mg/l	-
Recommended result: 0 mg/l Result: 0 mg/l Arsenic In the ocean water, it is present in a very low concentration (up to 3 µg/l). Most of the arsenic is absorbed by phytoplankton. Due to its toxicity, elevated arsenic levels are dangerous to marine life.
B Boron	4.05 - 5.00 mg/l	4.09 mg/l	- 0.435 mg/l
Recommended result: 4.525 mg/l Result: 4.09 mg/l Boron It is an important component of seawater. It takes part in the metabolism of calcium and accelerates the growth of coralline algae. Proper boron levels support the development of coral skeletons and also improve coloration.
Ba Barium	0.0010 - 0.0400 mg/l	0.0111 mg/l	- 0.0094 mg/l
Recommended result: 0.0205 mg/l Result: 0.0111 mg/l Barium A natural component of seawater. Barium is regularly consumed by aquarium inhabitants. In heavily stocked aquariums, water changes may not be sufficient to maintain barium at the appropriate level, then additional supplementation is recommended.
Be Beryllium	0 - 0.0050 mg/l	0 mg/l	-
Recommended result: 0 mg/l Result: 0 mg/l Beryllium It is an undesirable element in aquariums. It also doesn't occur in the natural seawater. In order to remove beryllium, perform a water change and, if possible, eliminate the source of contamination.
Cd Cadmium	0 - 0.0002 mg/l	0 mg/l	-
Recommended result: 0 mg/l Result: 0 mg/l Cadmium In natural seawater it occurs up to 0.2 µg/l concentration. It appears as pollutant in the marine aquariums. It is recommended to change the water, in order to remove cadmium from the aquarium.
Co Cobalt	0.0001 - 0.0006 mg/l	0 mg/l	- 0.00035 mg/l
Recommended result: 0.00035 mg/l Result: 0 mg/l Recommendations Warning! Level of cobalt is too low. Please remember, that maximum safe daily dose is 1 ml per 100 litres of water. If you need a higher dose, split it into a few days. Correct the result by using: Cobaltum Suggested dosage for your tank: 3.15 ml Cobalt It supports the coloration of fish and is essential for the growth of beneficial algae, bacteria and animals. It is extremely important for metabolic changes, it is part of vitamin B12. In a closed aquarium system, it is regularly consumed by its inhabitants.
Cr Chromium	0.0001 - 0.0004 mg/l	0 mg/l	- 0.00025 mg/l
Recommended result: 0.00025 mg/l Result: 0 mg/l Recommendations Warning! Level of chromium is too low. Please remember, that maximum safe daily dose is 1 ml per 100 litres of water. If you need a higher dose, split it into a few days. Correct the result by using: Chromium Suggested dosage for your tank: 2.25 ml Chromium Chromium is an essential micronutrient that significantly influences the growth of marine organisms. Its appropriate content in aquarium water supports the calcification of skeletons in invertebrates and has a positive effect on the corals coloration.
Cu Copper	0 - 0.0012 mg/l	0 mg/l	-
Recommended result: 0 mg/l Result: 0 mg/l Copper It occurs naturally in marine waters, but its excess is toxic. Too high level of copper is fatal to invertebrates. Usually it appears in the aquarium when using medications based on copper sulfate.
Fe Iron	0.0020 - 0.0060 mg/l	0.0005 mg/l	- 0.0035 mg/l
Recommended result: 0.004 mg/l Result: 0.0005 mg/l Recommendations Warning! Level of iron is too low. Please remember, that maximum safe daily dose is 1 ml per 100 litres of water. If you need a higher dose, split it into a few days. Correct the result by using: Ferrum Suggested dosage for your tank: 15.75 ml Iron It plays an important role in the photosynthesis process, therefore its supplementation improves the process of coral nutrition. Supports green coloration. Excess of iron can cause algae.
Hg Mercury	0 - 0.0050 mg/l	0 mg/l	-
Recommended result: 0 mg/l Result: 0 mg/l Mercury It does not occur in natural seawater. It appears as a pollutant in aquariums and is very undesirable due to its harmfulness to marine organisms. Water changes will help lower the mercury levels in the aquarium.
I Iodine	0.0550 - 0.0700 mg/l	0.0297 mg/l	- 0.0328 mg/l
Recommended result: 0.0625 mg/l Result: 0.0297 mg/l Recommendations Warning! Level of iodine is too low, if you want to raise it, use Iodum. Please remember, that maximum safe daily dose is 2 ml per 100 litres of water. If you need a higher dose, split it into a few days. Correct the result by using: Iodum Suggested dosage for your tank: 14.76 ml Iodine It is an extremely important microelement for corals and invertebrates. It boosts dark blue and purple coloration of hard corals. Iodine has disinfectant properties and is also very helpful in breeding marine fish.
La Lanthanum	0 - 0.0050 mg/l	0 mg/l	-
Recommended result: 0 mg/l Result: 0 mg/l Lanthanum Lanthanum is not found in natural marine waters. If it occurs in aquarium water, it should be treated as a pollutant. In order to remove lanthanum from the aquarium, change the water.
Li Lithium	0.1500 - 0.2000 mg/l	0.1950 mg/l	+ 0.02 mg/l
Recommended result: 0.175 mg/l Result: 0.1950 mg/l Lithium It naturally occurs in the seawater. In the natural environment of corals, it is present in a small but significant concentration, that is important for their health. The correct level of lithium provides keeping marine organisms good condition.
Mn Manganum	0.0001 - 0.0022 mg/l	0 mg/l	- 0.00115 mg/l
Recommended result: 0.00115 mg/l Result: 0 mg/l Recommendations Warning! Level of manganese is too low. Please remember, that maximum safe daily dose is 1 ml per 100 litres of water. If you need a higher dose, split it into a few days. Correct the result by using: Manganum Suggested dosage for your tank: 5.18 ml Manganum Similar to other trace elements, it is regularly consumed by the inhabitants of the aquarium. In heavily stocked tanks, water changes may not be sufficient to maintain its appropriate level, so sometimes additional supplementation is necessary.
Mo Molybdenum	0.0045 - 0.0120 mg/l	0.0077 mg/l	- 0.00055 mg/l
Recommended result: 0.00825 mg/l Result: 0.0077 mg/l Molybdenum It has a positive effect on enzymatic processes in marine aquariums. Its appropriate level boosts coloration of SPS and LPS corals.
Ni Nickel	0.0010 - 0.0100 mg/l	0.0005 mg/l	- 0.005 mg/l
Recommended result: 0.0055 mg/l Result: 0.0005 mg/l Recommendations Warning! Level of nickel is too low. Please remember, that maximum safe daily dose is 2 ml per 100 litres of water. If you need a higher dose, split it into a few days. Correct the result by using: Niccolum Suggested dosage for your tank: 22.5 ml Nickel Nickel is found in natural seawater as a trace element. Despite its very low content, it plays an extremely important role in the proper growth of corals. It improves coloration and helps keeping them in a good condition. Its deposits are regularly consumed by the inhabitants of the aquarium.
Pb Lead	0 - 0 mg/l	0 mg/l	-
Recommended result: 0 mg/l Result: 0 mg/l Lead Lead is a heavy metal that is not found in the natural seawater. It appears as pollution in reef aquariums. Due to its toxicity to marine life, it is undesirable in an aquarium.
Sb Antimony	0 - 0.0005 mg/l	0 mg/l	-
Recommended result: 0 mg/l Result: 0 mg/l Antimony Very low level of antimony occurs in natural sea waters. If it appears in the aquarium, it should be treated as contamination. You can eliminate antimony by changing the water.
Sc Scandium	0 - 0.0050 mg/l	0 mg/l	-
Recommended result: 0 mg/l Result: 0 mg/l Scandium Scandium is a metal that is not found in natural sea waters. It appears as pollutant in the aquariums. Changing the water will help eliminate scandium in the tank.
Se Selenium	0 - 0.0015 mg/l	0 mg/l	-
Recommended result: 0 mg/l Result: 0 mg/l Selenium Occurs naturally in the seawater in very small amounts. If it occurs in an aquarium, it is most often the result of contamination. A water change will help eliminate selenium from the aquarium.
Si Silicon	0.0200 - 2.9000 mg/l	0.2310 mg/l	- 1.229 mg/l
Recommended result: 1.46 mg/l Result: 0.2310 mg/l Silicon Excess of silicon is undesired in the aquarium. While silicates are not dangerous to the aquatic life, they have a huge impact on the formation of unwanted algae. Too high a level leads to the formation of diatoms.
Sn Tin	0 - 0.0010 mg/l	0 mg/l	-
Recommended result: 0 mg/l Result: 0 mg/l Tin It occurs in seawater in a very low concentration. Elevated levels of tin in the aquarium may be caused by the use of aquarium equipment made of inappropriate materials.
Ti Titanium	0 - 0.0100 mg/l	0 mg/l	-
Recommended result: 0 mg/l Result: 0 mg/l Titanium It occurs in natural seawater up to 10 µg/l. In the aquarium, it should be treated as a pollutant. In order to remove titanium from the tank, change the water.
V Vanadium	0.0001 - 0.0025 mg/l	0 mg/l	- 0.0013 mg/l
Recommended result: 0.0013 mg/l Result: 0 mg/l Recommendations Warning! Level of vanadium is too low. Please remember, that maximum safe daily dose is 1 ml per 100 litres of water. If you need a higher dose, split it into a few days. Correct the result by using: Vanadium Suggested dosage for your tank: 5.85 ml Vanadium Vanadium is a trace element, that occurs naturally in the seawater. It is an important enzyme activator. This element also participates in the metabolism of carbohydrates and the mineralization of skeletons.
W Wolfram	0 - 0.0050 mg/l	0 mg/l	-
Recommended result: 0 mg/l Result: 0 mg/l Wolfram Wolfram is not found in natural marine waters. It appears as pollution in aquariums. In order to remove wolfram from the aquarium, make a water change.
Zn Zinc	0.0010 - 0.0070 mg/l	0.0036 mg/l	- 0.0004 mg/l
Recommended result: 0.004 mg/l Result: 0.0036 mg/l Zinc It occurs in natural seawater, and its deposits are regularly consumed by aquarium inahbitants. Zinc is a component of many enzymes responsible for various processes, including protein metabolism. It affects cell division, tissue repair, and stimulates growth.
P Phosphorus	0 - 0.0100 mg/l	0.2240 mg/l	+ 0.224 mg/l
Recommended result: 0 mg/l Result: 0.2240 mg/l Recommendations Warning! Level of phosphorus is too high, if you want to lower it, do a water change and use Phosphate Minus or NitraPhos Minus. You can also use Pro Bio S combined with -NP Pro. Phosphorus Phosphate in the aquarium water appear as a side effect of feeding the fish. They are a media for the development of undesirable algae. During intensive feeding, you should remember not only about the use of phosphate lowering media, but also about regular water changes.
Na Sodium	9720 - 11880 mg/l	10546 mg/l	- 254 mg/l
Recommended result: 10800 mg/l Result: 10546 mg/l Sodium It is the main component of marine waters. Its concentration varies from 9720-11880 mg/l at the salinity of 33-35 ppt. In the aquarium, it comes from dissolved sodium salt and from sodium bicarbonate used to maintain an adequate level of alkalinity.
Ca Calcium	380 - 460 mg/l	352 mg/l	- 68 mg/l
Recommended result: 420 mg/l Result: 352 mg/l Recommendations Warning! Level of calcium is too low. Please remember, that maximum safe daily dose is 10 ml per 100 litres of water. If you need a higher dose, split it into a few days. Correct the result by using: Ca Plus Suggested dosage for your tank: 153 ml Calcium It's a building block necessary for the proper growth and development of coral skeletons, shrimp and clam shells. The more heavily stocked the aquarium is, the more it increases the demand for calcium. In the natural seawater, the calcium level is approx. 420 mg/l.
Mg Magnesium	1180 - 1460 mg/l	1466 mg/l	+ 146 mg/l
Recommended result: 1320 mg/l Result: 1466 mg/l Recommendations Warning! Level of magnesium is too high, if you want to lower it, do a water change. Magnesium Its main task is faciliating the calcium absorption. Correct level has a positive effect on the skeletons and appearance of corals. It plays an important role in preventing excessive precipitation of calcium and carbonate. Low magnesium content can lower the pH level in the tank and make it difficult to maintain an adequate calcium concentration.
K Kalium	360 - 420 mg/l	397 mg/l	+ 7 mg/l
Recommended result: 390 mg/l Result: 397 mg/l Kalium It affects possitively neurological functions. Enhances the pink and red coloration of the corals. In soft corals, potassium plays an important role in nutrients transport.
Br Bromium	55.0 - 74.0 mg/l	87.4 mg/l	+ 22.9 mg/l
Recommended result: 64.5 mg/l Result: 87.4 mg/l Recommendations Warning! Level of bromine is too high, if you want to lower it, do a water change. Bromium Essential component of a natural sea water. Affects positively corals' coloration and their overall condition.
Sr Strontium	6.00 - 10.00 mg/l	3.56 mg/l	- 4.44 mg/l
Recommended result: 8 mg/l Result: 3.56 mg/l Recommendations Warning! Level of strontium is too low. Please remember, that maximum safe daily dose is 10 ml per 100 litres of water. If you need a higher dose, split it into a few days. Correct the result by using: Strontium Suggested dosage for your tank: 199.8 ml Strontium Besides of calcium and magnesium, it is one of the most important elements necessary for the proper growth of SPS corals. It helps to build skeletal tissue and facilitates calcium absorption.
S Sulfur	740 - 990 mg/l	800 mg/l	- 65 mg/l
Recommended result: 865 mg/l Result: 800 mg/l Sulfur It is one of the naturally occurring macronutrients in marine waters. The appropriate level of sulfur in the aquarium enhances the color of the corals.

RO water

Element	Recommended result	Result	Difference
PO4 Phosphate (RO)	0 - 0.0010 mg/l	0.0101 mg/l	+ 0.0101 mg/l
Recommended result: 0 mg/l Result: 0.0101 mg/l Phosphate (RO) Phosphate in the aquarium water appear as a side effect of feeding the fish. They're a media for the development of undesirable algae. During intensive feeding, you should remember not only about the use of phosphate lowering agents or about regular water changes.
Ba Barium (RO)	0 - 0 mg/l	0.0103 mg/l	+ 0.0103 mg/l
Recommended result: 0 mg/l Result: 0.0103 mg/l Barium (RO) A natural component of seawater. Barium is regularly consumed by aquarium inhabitants. In heavily stocked aquariums, water changes may not be sufficient to maintain barium at the appropriate level, then additional supplementation is recommended.
Be Beryllium (RO)	0 - 0 mg/l	0 mg/l	-
Recommended result: 0 mg/l Result: 0 mg/l Beryllium (RO) It is an undesirable element in aquariums. It also doesn't occur in the natural seawater. In order to remove beryllium, perform a water change and, if possible, eliminate the source of contamination.
Cd Cadmium (RO)	0 - 0 mg/l	0 mg/l	-
Recommended result: 0 mg/l Result: 0 mg/l Cadmium (RO) In natural seawater it occurs up to 0.2 µg/l concentration. It appears as pollutant in the marine aquariums. It is recommended to change the water, in order to remove cadmium from the aquarium.
Co Cobalt (RO)	0 - 0 mg/l	0 mg/l	-
Recommended result: 0 mg/l Result: 0 mg/l Cobalt (RO) It supports the coloration of fish and is essential for the growth of beneficial algae, bacteria and animals. It is extremely important for metabolic changes, it is part of vitamin B12. In a closed aquarium system, it is regularly consumed by its inhabitants.
Cr Chromium (RO)	0 - 0 mg/l	0 mg/l	-
Recommended result: 0 mg/l Result: 0 mg/l Chromium (RO) Chromium is an essential micronutrient that significantly influences the growth of marine organisms. Its appropriate content in aquarium water supports the calcification of skeletons in invertebrates and has a positive effect on the corals coloration.
Cu Copper (RO)	0 - 0 mg/l	0.0043 mg/l	+ 0.0043 mg/l
Recommended result: 0 mg/l Result: 0.0043 mg/l Copper (RO) It occurs naturally in marine waters, but its excess is toxic. Too high level of copper is fatal to invertebrates. Usually it appears in the aquarium when using medications based on copper sulfate.
Fe Iron (RO)	0 - 0 mg/l	0.0031 mg/l	+ 0.0031 mg/l
Recommended result: 0 mg/l Result: 0.0031 mg/l Iron (RO) It plays an important role in the photosynthesis process, therefore its supplementation improves the process of coral nutrition. Supports green coloration. Excess of iron can cause algae.
Hg Mercury (RO)	0 - 0 mg/l	0 mg/l	-
Recommended result: 0 mg/l Result: 0 mg/l Mercury (RO) It does not occur in natural seawater. It appears as a pollutant in aquariums and is very undesirable due to its harmfulness to marine organisms. Water changes will help lower the mercury levels in the aquarium.
La Lanthanum (RO)	0 - 0 mg/l	0 mg/l	-
Recommended result: 0 mg/l Result: 0 mg/l Lanthanum (RO) Lanthanum is not found in natural marine waters. If it occurs in aquarium water, it should be treated as a pollutant. In order to remove lanthanum from the aquarium, change the water.
Li Lithium (RO)	0 - 0 mg/l	0.0082 mg/l	+ 0.0082 mg/l
Recommended result: 0 mg/l Result: 0.0082 mg/l Lithium (RO) It naturally occurs in the seawater. In the natural environment of corals, it is present in a small but significant concentration, that is important for their health. The correct level of lithium provides keeping marine organisms good condition.
Mn Manganum (RO)	0 - 0 mg/l	0 mg/l	-
Recommended result: 0 mg/l Result: 0 mg/l Manganum (RO) Similar to other trace elements, it is regularly consumed by the inhabitants of the aquarium. In heavily stocked tanks, water changes may not be sufficient to maintain its appropriate level, so sometimes additional supplementation is necessary.
Mo Molybdenum (RO)	0 - 0 mg/l	0 mg/l	-
Recommended result: 0 mg/l Result: 0 mg/l Molybdenum (RO) It has a positive effect on enzymatic processes in marine aquariums. Its appropriate level boosts coloration of SPS and LPS corals.
Ni Nickel (RO)	0 - 0 mg/l	0 mg/l	-
Recommended result: 0 mg/l Result: 0 mg/l Nickel (RO) Nickel is found in natural seawater as a trace element. Despite its very low content, it plays an extremely important role in the proper growth of corals. It improves coloration and helps keeping them in a good condition. Its deposits are regularly consumed by the inhabitants of the aquarium.
Pb Lead (RO)	0 - 0 mg/l	0 mg/l	-
Recommended result: 0 mg/l Result: 0 mg/l Lead (RO) Lead is a heavy metal that is not found in the natural seawater. It appears as pollution in reef aquariums. Due to its toxicity to marine life, it is undesirable in an aquarium.
Sb Antimony (RO)	0 - 0 mg/l	0 mg/l	-
Recommended result: 0 mg/l Result: 0 mg/l Antimony (RO) Very low level of antimony occurs in natural sea waters. If it appears in the aquarium, it should be treated as contamination. You can eliminate antimony by changing the water.
Sc Scandium (RO)	0 - 0 mg/l	0 mg/l	-
Recommended result: 0 mg/l Result: 0 mg/l Scandium (RO) Scandium is a metal that is not found in natural sea waters. It appears as pollutant in the aquariums. Changing the water will help eliminate scandium in the tank.
Se Selenium (RO)	0 - 0 mg/l	0 mg/l	-
Recommended result: 0 mg/l Result: 0 mg/l Selenium (RO) Occurs naturally in the seawater in very small amounts. If it occurs in an aquarium, it is most often the result of contamination. A water change will help eliminate selenium from the aquarium.
Si Silicon (RO)	0 - 0 mg/l	9.9640 mg/l	+ 9.964 mg/l
Recommended result: 0 mg/l Result: 9.9640 mg/l Silicon (RO) Excess of silicon is undesired in the aquarium. While silicates are not dangerous to the aquatic life, they have a huge impact on the formation of unwanted algae. Too high a level leads to the formation of diatoms.
Sn Tin (RO)	0 - 0 mg/l	0 mg/l	-
Recommended result: 0 mg/l Result: 0 mg/l Tin (RO) It occurs in seawater in a very low concentration. Elevated levels of tin in the aquarium may be caused by the use of aquarium equipment made of inappropriate materials.
Ti Titanum (RO)	0 - 0 mg/l	0 mg/l	-
Recommended result: 0 mg/l Result: 0 mg/l Titanum (RO) It occurs in natural seawater up to 10 µg/l. In the aquarium, it should be treated as a pollutant. In order to remove titanium from the tank, change the water.
V Vanadium (RO)	0 - 0 mg/l	0 mg/l	-
Recommended result: 0 mg/l Result: 0 mg/l Vanadium (RO) Vanadium is a trace element, that occurs naturally in the seawater. It is an important enzyme activator. This element also participates in the metabolism of carbohydrates and the mineralization of skeletons.
W Wolfram (RO)	0 - 0 mg/l	0 mg/l	-
Recommended result: 0 mg/l Result: 0 mg/l Wolfram (RO) Wolfram is not found in natural marine waters. It appears as pollution in aquariums. In order to remove wolfram from the aquarium, make a water change.
Zn Zinc (RO)	0 - 0 mg/l	0.0063 mg/l	+ 0.0063 mg/l
Recommended result: 0 mg/l Result: 0.0063 mg/l Zinc (RO) It occurs in natural seawater, and its deposits are regularly consumed by aquarium inahbitants. Zinc is a component of many enzymes responsible for various processes, including protein metabolism. It affects cell division, tissue repair, and stimulates growth.
P Phosphorus (RO)	0 - 0 mg/l	0.0033 mg/l	+ 0.0033 mg/l
Recommended result: 0 mg/l Result: 0.0033 mg/l Phosphorus (RO) Phosphate in the aquarium water appear as a side effect of feeding the fish. They are a media for the development of undesirable algae. During intensive feeding, you should remember not only about the use of phosphate lowering media, but also about regular water changes.
Al Aluminum (RO)	0 - 0 mg/l	0.0015 mg/l	+ 0.0015 mg/l
Recommended result: 0 mg/l Result: 0.0015 mg/l Aluminum (RO) The concentration of aluminum in the natural seawater is about 10 µg/l. In case of increased level of this element in the tank, change the water in order to emove it excess.
As Arsenic (RO)	0 - 0 mg/l	0 mg/l	-
Recommended result: 0 mg/l Result: 0 mg/l Arsenic (RO) In the ocean water, it is present in a very low concentration (up to 3 µg/l). Most of the arsenic is absorbed by phytoplankton. Due to its toxicity, elevated arsenic levels are dangerous to marine life.
B Boron (RO)	0 - 0.0010 mg/l	0 mg/l	-
Recommended result: 0 mg/l Result: 0 mg/l Boron (RO) It is an important component of seawater. It takes part in the metabolism of calcium and accelerates the growth of coralline algae. Proper boron levels support the development of coral skeletons and also improve coloration.
Na Sodium (RO)	0 - 0.0010 mg/l	98.5000 mg/l	+ 98.5 mg/l
Recommended result: 0 mg/l Result: 98.5000 mg/l Sodium (RO) It is the main component of marine waters. Its concentration varies from 9720-11880 mg/l at the salinity of 33-35 ppt. In the aquarium, it comes from dissolved sodium salt and from sodium bicarbonate used to maintain an adequate level of alkalinity.
Ca Calcium (RO)	0 - 0.0010 mg/l	30.6000 mg/l	+ 30.6 mg/l
Recommended result: 0 mg/l Result: 30.6000 mg/l Calcium (RO) It's a building block necessary for the proper growth and development of coral skeletons, shrimp and clam shells. The more heavily stocked the aquarium is, the more it increases the demand for calcium. In the natural seawater, the calcium level is approx. 420 mg/l.
Mg Magnesium (RO)	0 - 0.0010 mg/l	6.1000 mg/l	+ 6.1 mg/l
Recommended result: 0 mg/l Result: 6.1000 mg/l Magnesium (RO) Its main task is faciliating the calcium absorption. Correct level has a positive effect on the skeletons and appearance of corals. It plays an important role in preventing excessive precipitation of calcium and carbonate. Low magnesium content can lower the pH level in the tank and make it difficult to maintain an adequate calcium concentration.
K Kalium (RO)	0 - 0.0010 mg/l	4.1600 mg/l	+ 4.16 mg/l
Recommended result: 0 mg/l Result: 4.1600 mg/l Kalium (RO) It affects possitively neurological functions. Enhances the pink and red coloration of the corals. In soft corals, potassium plays an important role in nutrients transport.
Br Bromium (RO)	0 - 0.0010 mg/l	0 mg/l	-
Recommended result: 0 mg/l Result: 0 mg/l Bromium (RO) Essential component of a natural sea water. Affects positively corals' coloration and their overall condition.
Sr Strontium (RO)	0 - 0.0010 mg/l	0.7180 mg/l	+ 0.718 mg/l
Recommended result: 0 mg/l Result: 0.7180 mg/l Strontium (RO) Besides of calcium and magnesium, it is one of the most important elements necessary for the proper growth of SPS corals. It helps to build skeletal tissue and facilitates calcium absorption.
S Sulfur (RO)	0 - 0.0010 mg/l	21.9000 mg/l	+ 21.9 mg/l
Recommended result: 0 mg/l Result: 21.9000 mg/l Sulfur (RO) It is one of the naturally occurring macronutrients in marine waters. The appropriate level of sulfur in the aquarium enhances the color of the corals.

Salinity

KH

Recommendations

Phosphate

Recommendations

Aluminum

Arsenic

Boron

Barium

Beryllium

Cadmium

Recommendations

Cobalt

Recommendations

Chromium

Copper

Recommendations

Iron

Mercury

Recommendations

Iodine

Lanthanum

Lithium

Recommendations

Manganum

Molybdenum

Recommendations

Nickel

Lead

Antimony

Scandium

Selenium

Silicon

Tin

Titanium

Recommendations

Vanadium

Wolfram

Zinc

Recommendations

Phosphorus

Sodium

Recommendations

Calcium

Recommendations

Magnesium

Kalium

Recommendations

Bromium

Recommendations

Strontium

Sulfur

RO water

Phosphate (RO)

Barium (RO)

Beryllium (RO)

Cadmium (RO)

Cobalt (RO)

Chromium (RO)

Copper (RO)

Iron (RO)

Mercury (RO)

Lanthanum (RO)

Lithium (RO)

Manganum (RO)

Molybdenum (RO)

Nickel (RO)

Lead (RO)

Antimony (RO)

Scandium (RO)

Selenium (RO)

Silicon (RO)

Tin (RO)

Titanum (RO)

Vanadium (RO)

Wolfram (RO)

Zinc (RO)

Phosphorus (RO)

Aluminum (RO)

Arsenic (RO)