Test wody #3305330

Test Sea water: 3305330

Aquarium (SPS): The one tank

Date: 2024-09-27

Element	Recommended result	Result	Difference
Salinity Salinity	33 - 38 ppt	34 ppt	- 1.5 ppt
Recommended result: 35.5 ppt Result: 34 ppt Salinity Salinity is one of the most important parameters. Avoid sudden salinity changes as they're harmful to the aquatic life. Make sure, that you use freshly calibrated refractometer dedicated for seawater (not for the food industry!). Keep in mind, that the higher salinity is, the higher are the levels of micro & macro elements in the water. When salinity drops, all levels of the water elements will drop too.
KH KH	6.5 - 8.5 dKH	7.8 dKH	+ 0.3 dKH
Recommended result: 7.5 dKH Result: 7.8 dKH KH The correct KH level in a saltwater aquarium allows corals to build skeletons and provides healthy growth. The right amount of carbonate ions allows keeping pH at a stable level. Stability is extremely important for this parameter, so if your corals start whitening from the bottom, you should consider controlling your KH levels more frequently.
PO4 Phosphate	0 - 0.0300 mg/l	0.2206 mg/l	+ 0.2206 mg/l
Recommended result: 0 mg/l Result: 0.2206 mg/l Recommendations Warning! Level of PO4 is too high, if you want to lower it, do a water change and use Phosphate Minus and NitraPhos Minus. You can also use Pro Bio S and -NP Pro. Phosphate Phosphate in the aquarium water appear as a side effect of feeding the fish. They're a media for the development of undesirable algae. During intensive feeding, you should remember not only about the use of phosphate lowering agents or about regular water changes.
Al Aluminum	0 - 0.0100 mg/l	0.0162 mg/l	+ 0.0162 mg/l
Recommended result: 0 mg/l Result: 0.0162 mg/l Recommendations Warning! Level of aluminium is too high, if you want to lower it, do a water change. It's worth to check your RO water for contaminants. Aluminum The concentration of aluminum in the natural seawater is about 10 µg/l. In case of increased level of this element in the tank, change the water in order to emove it excess.
As Arsenic	0 - 0.0030 mg/l	0 mg/l	-
Recommended result: 0 mg/l Result: 0 mg/l Arsenic In the ocean water, it is present in a very low concentration (up to 3 µg/l). Most of the arsenic is absorbed by phytoplankton. Due to its toxicity, elevated arsenic levels are dangerous to marine life.
B Boron	4.05 - 5.00 mg/l	4.44 mg/l	- 0.085 mg/l
Recommended result: 4.525 mg/l Result: 4.44 mg/l Boron It is an important component of seawater. It takes part in the metabolism of calcium and accelerates the growth of coralline algae. Proper boron levels support the development of coral skeletons and also improve coloration.
Ba Barium	0.0010 - 0.0400 mg/l	0.0176 mg/l	- 0.0029 mg/l
Recommended result: 0.0205 mg/l Result: 0.0176 mg/l Barium A natural component of seawater. Barium is regularly consumed by aquarium inhabitants. In heavily stocked aquariums, water changes may not be sufficient to maintain barium at the appropriate level, then additional supplementation is recommended.
Be Beryllium	0 - 0.0050 mg/l	0 mg/l	-
Recommended result: 0 mg/l Result: 0 mg/l Beryllium It is an undesirable element in aquariums. It also doesn't occur in the natural seawater. In order to remove beryllium, perform a water change and, if possible, eliminate the source of contamination.
Cd Cadmium	0 - 0.0002 mg/l	0 mg/l	-
Recommended result: 0 mg/l Result: 0 mg/l Cadmium In natural seawater it occurs up to 0.2 µg/l concentration. It appears as pollutant in the marine aquariums. It is recommended to change the water, in order to remove cadmium from the aquarium.
Co Cobalt	0.0001 - 0.0006 mg/l	0 mg/l	- 0.00035 mg/l
Recommended result: 0.00035 mg/l Result: 0 mg/l Recommendations Warning! Level of cobalt is too low. Please remember, that maximum safe daily dose is 1 ml per 100 litres of water. If you need a higher dose, split it into a few days. Correct the result by using: Cobaltum Suggested dosage for your tank: 4.55 ml Cobalt It supports the coloration of fish and is essential for the growth of beneficial algae, bacteria and animals. It is extremely important for metabolic changes, it is part of vitamin B12. In a closed aquarium system, it is regularly consumed by its inhabitants.
Cr Chromium	0.0001 - 0.0004 mg/l	0 mg/l	- 0.00025 mg/l
Recommended result: 0.00025 mg/l Result: 0 mg/l Recommendations Warning! Level of chromium is too low. Please remember, that maximum safe daily dose is 1 ml per 100 litres of water. If you need a higher dose, split it into a few days. Correct the result by using: Chromium Suggested dosage for your tank: 3.25 ml Chromium Chromium is an essential micronutrient that significantly influences the growth of marine organisms. Its appropriate content in aquarium water supports the calcification of skeletons in invertebrates and has a positive effect on the corals coloration.
Cu Copper	0 - 0.0012 mg/l	0 mg/l	-
Recommended result: 0 mg/l Result: 0 mg/l Copper It occurs naturally in marine waters, but its excess is toxic. Too high level of copper is fatal to invertebrates. Usually it appears in the aquarium when using medications based on copper sulfate.
Fe Iron	0.0020 - 0.0060 mg/l	0.0016 mg/l	- 0.0024 mg/l
Recommended result: 0.004 mg/l Result: 0.0016 mg/l Recommendations Warning! Level of iron is too low. Please remember, that maximum safe daily dose is 1 ml per 100 litres of water. If you need a higher dose, split it into a few days. Correct the result by using: Ferrum Suggested dosage for your tank: 15.6 ml Iron It plays an important role in the photosynthesis process, therefore its supplementation improves the process of coral nutrition. Supports green coloration. Excess of iron can cause algae.
Hg Mercury	0 - 0.0050 mg/l	0 mg/l	-
Recommended result: 0 mg/l Result: 0 mg/l Mercury It does not occur in natural seawater. It appears as a pollutant in aquariums and is very undesirable due to its harmfulness to marine organisms. Water changes will help lower the mercury levels in the aquarium.
I Iodine	0.0550 - 0.0700 mg/l	0.0377 mg/l	- 0.0248 mg/l
Recommended result: 0.0625 mg/l Result: 0.0377 mg/l Recommendations Warning! Level of iodine is too low, if you want to raise it, use Iodum. Please remember, that maximum safe daily dose is 2 ml per 100 litres of water. If you need a higher dose, split it into a few days. Correct the result by using: Iodum Suggested dosage for your tank: 16.12 ml Iodine It is an extremely important microelement for corals and invertebrates. It boosts dark blue and purple coloration of hard corals. Iodine has disinfectant properties and is also very helpful in breeding marine fish.
La Lanthanum	0 - 0.0050 mg/l	0 mg/l	-
Recommended result: 0 mg/l Result: 0 mg/l Lanthanum Lanthanum is not found in natural marine waters. If it occurs in aquarium water, it should be treated as a pollutant. In order to remove lanthanum from the aquarium, change the water.
Li Lithium	0.1500 - 0.2000 mg/l	0.1520 mg/l	- 0.023 mg/l
Recommended result: 0.175 mg/l Result: 0.1520 mg/l Lithium It naturally occurs in the seawater. In the natural environment of corals, it is present in a small but significant concentration, that is important for their health. The correct level of lithium provides keeping marine organisms good condition.
Mn Manganum	0.0001 - 0.0022 mg/l	0.0001 mg/l	- 0.00105 mg/l
Recommended result: 0.00115 mg/l Result: 0.0001 mg/l Recommendations Warning! Level of manganese is too low. Please remember, that maximum safe daily dose is 1 ml per 100 litres of water. If you need a higher dose, split it into a few days. Correct the result by using: Manganum Suggested dosage for your tank: 6.83 ml Manganum Similar to other trace elements, it is regularly consumed by the inhabitants of the aquarium. In heavily stocked tanks, water changes may not be sufficient to maintain its appropriate level, so sometimes additional supplementation is necessary.
Mo Molybdenum	0.0045 - 0.0120 mg/l	0.0021 mg/l	- 0.00615 mg/l
Recommended result: 0.00825 mg/l Result: 0.0021 mg/l Recommendations Warning! Level of molybdenum is too low. Please remember, that maximum safe daily dose is 2 ml per 100 litres of water. If you need a higher dose, split it into a few days. Correct the result by using: Molybdenum Suggested dosage for your tank: 39.98 ml Molybdenum It has a positive effect on enzymatic processes in marine aquariums. Its appropriate level boosts coloration of SPS and LPS corals.
Ni Nickel	0.0010 - 0.0100 mg/l	0 mg/l	- 0.0055 mg/l
Recommended result: 0.0055 mg/l Result: 0 mg/l Recommendations Warning! Level of nickel is too low. Please remember, that maximum safe daily dose is 2 ml per 100 litres of water. If you need a higher dose, split it into a few days. Correct the result by using: Niccolum Suggested dosage for your tank: 35.75 ml Nickel Nickel is found in natural seawater as a trace element. Despite its very low content, it plays an extremely important role in the proper growth of corals. It improves coloration and helps keeping them in a good condition. Its deposits are regularly consumed by the inhabitants of the aquarium.
Pb Lead	0 - 0 mg/l	0 mg/l	-
Recommended result: 0 mg/l Result: 0 mg/l Lead Lead is a heavy metal that is not found in the natural seawater. It appears as pollution in reef aquariums. Due to its toxicity to marine life, it is undesirable in an aquarium.
Sb Antimony	0 - 0.0005 mg/l	0 mg/l	-
Recommended result: 0 mg/l Result: 0 mg/l Antimony Very low level of antimony occurs in natural sea waters. If it appears in the aquarium, it should be treated as contamination. You can eliminate antimony by changing the water.
Sc Scandium	0 - 0.0050 mg/l	0 mg/l	-
Recommended result: 0 mg/l Result: 0 mg/l Scandium Scandium is a metal that is not found in natural sea waters. It appears as pollutant in the aquariums. Changing the water will help eliminate scandium in the tank.
Se Selenium	0 - 0.0015 mg/l	0 mg/l	-
Recommended result: 0 mg/l Result: 0 mg/l Selenium Occurs naturally in the seawater in very small amounts. If it occurs in an aquarium, it is most often the result of contamination. A water change will help eliminate selenium from the aquarium.
Si Silicon	0.0200 - 2.9000 mg/l	0.0977 mg/l	- 1.3623 mg/l
Recommended result: 1.46 mg/l Result: 0.0977 mg/l Silicon Excess of silicon is undesired in the aquarium. While silicates are not dangerous to the aquatic life, they have a huge impact on the formation of unwanted algae. Too high a level leads to the formation of diatoms.
Sn Tin	0 - 0.0010 mg/l	0 mg/l	-
Recommended result: 0 mg/l Result: 0 mg/l Tin It occurs in seawater in a very low concentration. Elevated levels of tin in the aquarium may be caused by the use of aquarium equipment made of inappropriate materials.
Ti Titanium	0 - 0.0100 mg/l	0 mg/l	-
Recommended result: 0 mg/l Result: 0 mg/l Titanium It occurs in natural seawater up to 10 µg/l. In the aquarium, it should be treated as a pollutant. In order to remove titanium from the tank, change the water.
V Vanadium	0.0001 - 0.0025 mg/l	0 mg/l	- 0.0013 mg/l
Recommended result: 0.0013 mg/l Result: 0 mg/l Recommendations Warning! Level of vanadium is too low. Please remember, that maximum safe daily dose is 1 ml per 100 litres of water. If you need a higher dose, split it into a few days. Correct the result by using: Vanadium Suggested dosage for your tank: 8.45 ml Vanadium Vanadium is a trace element, that occurs naturally in the seawater. It is an important enzyme activator. This element also participates in the metabolism of carbohydrates and the mineralization of skeletons.
W Wolfram	0 - 0.0050 mg/l	0 mg/l	-
Recommended result: 0 mg/l Result: 0 mg/l Wolfram Wolfram is not found in natural marine waters. It appears as pollution in aquariums. In order to remove wolfram from the aquarium, make a water change.
Zn Zinc	0.0010 - 0.0070 mg/l	0.0045 mg/l	+ 0.0005 mg/l
Recommended result: 0.004 mg/l Result: 0.0045 mg/l Zinc It occurs in natural seawater, and its deposits are regularly consumed by aquarium inahbitants. Zinc is a component of many enzymes responsible for various processes, including protein metabolism. It affects cell division, tissue repair, and stimulates growth.
P Phosphorus	0 - 0.0100 mg/l	0.0720 mg/l	+ 0.072 mg/l
Recommended result: 0 mg/l Result: 0.0720 mg/l Recommendations Warning! Level of phosphorus is too high, if you want to lower it, do a water change and use Phosphate Minus or NitraPhos Minus. You can also use Pro Bio S combined with -NP Pro. Phosphorus Phosphate in the aquarium water appear as a side effect of feeding the fish. They are a media for the development of undesirable algae. During intensive feeding, you should remember not only about the use of phosphate lowering media, but also about regular water changes.
Na Sodium	9720 - 11880 mg/l	10216 mg/l	- 584 mg/l
Recommended result: 10800 mg/l Result: 10216 mg/l Sodium It is the main component of marine waters. Its concentration varies from 9720-11880 mg/l at the salinity of 33-35 ppt. In the aquarium, it comes from dissolved sodium salt and from sodium bicarbonate used to maintain an adequate level of alkalinity.
Ca Calcium	380 - 460 mg/l	465 mg/l	+ 45 mg/l
Recommended result: 420 mg/l Result: 465 mg/l Recommendations Warning! Level of calcium is too high, if you want to lower it, do a water change. Calcium It's a building block necessary for the proper growth and development of coral skeletons, shrimp and clam shells. The more heavily stocked the aquarium is, the more it increases the demand for calcium. In the natural seawater, the calcium level is approx. 420 mg/l.
Mg Magnesium	1180 - 1460 mg/l	1272 mg/l	- 48 mg/l
Recommended result: 1320 mg/l Result: 1272 mg/l Magnesium Its main task is faciliating the calcium absorption. Correct level has a positive effect on the skeletons and appearance of corals. It plays an important role in preventing excessive precipitation of calcium and carbonate. Low magnesium content can lower the pH level in the tank and make it difficult to maintain an adequate calcium concentration.
K Kalium	360 - 420 mg/l	382 mg/l	- 8 mg/l
Recommended result: 390 mg/l Result: 382 mg/l Kalium It affects possitively neurological functions. Enhances the pink and red coloration of the corals. In soft corals, potassium plays an important role in nutrients transport.
Br Bromium	55.0 - 74.0 mg/l	80.4 mg/l	+ 15.9 mg/l
Recommended result: 64.5 mg/l Result: 80.4 mg/l Recommendations Warning! Level of bromine is too high, if you want to lower it, do a water change. Bromium Essential component of a natural sea water. Affects positively corals' coloration and their overall condition.
Sr Strontium	6.00 - 10.00 mg/l	6.91 mg/l	- 1.09 mg/l
Recommended result: 8 mg/l Result: 6.91 mg/l Strontium Besides of calcium and magnesium, it is one of the most important elements necessary for the proper growth of SPS corals. It helps to build skeletal tissue and facilitates calcium absorption.
S Sulfur	740 - 990 mg/l	800 mg/l	- 65 mg/l
Recommended result: 865 mg/l Result: 800 mg/l Sulfur It is one of the naturally occurring macronutrients in marine waters. The appropriate level of sulfur in the aquarium enhances the color of the corals.

Salinity

KH

Recommendations

Phosphate

Recommendations

Aluminum

Arsenic

Boron

Barium

Beryllium

Cadmium

Recommendations

Cobalt

Recommendations

Chromium

Copper

Recommendations

Iron

Mercury

Recommendations

Iodine

Lanthanum

Lithium

Recommendations

Manganum

Recommendations

Molybdenum

Recommendations

Nickel

Lead

Antimony

Scandium

Selenium

Silicon

Tin

Titanium

Recommendations

Vanadium

Wolfram

Zinc

Recommendations

Phosphorus

Sodium

Recommendations

Calcium

Magnesium

Kalium

Recommendations

Bromium

Strontium

Sulfur